Multi Magazine Unloader
Manufacturer: Nutek
Type: unloader
Model: NTM 110 ULL
Condition: good running
Quantity:1
Description:
-Easy operation by membrane keypad.
-Automatic magazine change-over.
-Automatic magazine alignment by upper and lower pneumatic clamping.
-Controlled by Omron PLC.
-Tailor made to the magazine of your choice.
-Threshold signal to protect PCB�s in upstream oven.
-Tower light display for machine status.
-Selectable pitch settings.
-Smema interface.
-CE cerified.
Transfer height 950mm � 25mm
Flow direction Left to right
Fixed rail Front
Machine interface SMEMA
Components clearance Top 30mm, bottom 30mm (depends on pitch)
Power supply 230VAC/50Hz/1Ph
Power consumption 350VA max.
Air supply 6 bar
Air consumption 10ltr/min max.
PCB unloading time � 6 seconds
Magazine change-over time � 30 seconds
Pitch control 1 � 4, 10mm pitch
Maximum total magazine weight 50kg each
Total number of magazines 1 magazine on the lifter platform.
2 empty magazines on the upper magazine conveyor.
3 full magazines on the lower magazine conveyor.
FIFO Buffer
Manufacturer: Nutek
Type: buffer
Model: NTM 640SL
Condition:good running
Quantity:5
Description:
-Easy operation by membrane keypad.
-Selectable FIFO and LIFO mode.
-Controlled by Omron PLC.
-Width adjustment by hand crank.
-Flexible pitch control.
-Threshold signal to protect PCB's in upstream oven.
-Tower light display for machine status.
-Smema interface.
-CE certified.
Transfer height 950mm � 25mm
Flow direction Left to right
Fixed rail Front
Conveyor concept ESD roller
Conveyor speed 8m/min.
PCB edge support 3mm
Components clearance Top 50mm, bottom 30mm (depends on pitch)
Power supply 230VAC/50Hz/1Ph
Power consumption 350VA max.
Air supply 6 bar
Air consumption 2ltr/min max.
Machine cycle time 22 seconds max. (worst case)
Pitch control 1 � 2, 20mm pitch
Buffer capacity Max. 26 pcb�s at pitch 1
Siepel Blindage Electromagnetic
Type: blindage EM
Model: anechoic cabinet
Condition: good
Quantity: 6
Description:
Suitable for small RF / microwave devices and / or antennas
- Knife edge shielded door, for high shielding effectiveness performances (120 dB @ 1 GHz)
- Internal lining with HYFRAL broadband absorbers
- Upgradeable and flexible
- Rugged for lab life
- Movable and space saving
Branson Ultrasonic Welder
Manufacturer: Branson
Type: welder
Model: 920iw+
Condition: New
Quantity:1
Description:
Line Voltage: 200-245 AC, 14 A
Output Power: 2000 W
Maximun Clamp Force: 630 lbs. at 100 psig (2.8 kN @690kPa)
Dynamic Triggering: 10 to 200 lbs. (67 to 890 N) max.
Stroke Length: 4'' (102 mm)
Weigth: 145 lbs. (66 kg)
Included Branson SEPG-UK
Vitronics Soltec 6632
Manufacturer: E-CUBE
Type: Soldering Line
Model: E3
Condition:Brand New
Quantity:1
Description:
Alone standing Soldering Line Conveyor especially created to compile whit lead free standards and perfect integration whit Soltec wave soldering machine. This conveyor supports all kind of modification to for fill our customer needs. This conveyor is designed whit 2 lifters so for operate this is enough one operator to handle the soltec and the conveyor. For more info see please the attachments and contact us.
Maestro 5MW Separator SOLD
Description:
MAESTRO 5MW is used most economically whenever large numbers of pre-scored PCBs need to be separated. The well-arranged control panel ensures easy operation. PCB panels with a maximum width of 457 mm can be separated by up to 14 circular blades simultaneously. Sensors are used to monitor the separation process. The PCBs are placed either by hand or they are fed automatically by a loading station. The machine can also be installed in an assembly line. The SMEMA interface is the standard connection for this use. The PCB Separator can be adjusted to your PCB and your individual requirements. Please contact us for more characteristics and technical data.
CS 8014 F.F.T Telephone Tester
Manufacturer: CS Strumentazione Elettronica
Type: tester
Model: CS 8014
Condition:good running
Quantity:19
Description:
-receiving, sending and side-tone sensitivities and frequency responses
-generation & sound level measurement
-Insulation up to 250V
-V(I) measurements on-hook or off-hook
-I(t) measurements for transient evaluation
-other switch sequences
-network tones generator
-DTMF generator
-FSK-V23 caller identifier generator
-DTMF caller identifier generator
-on-hook & off-hook operations
-Submits and Delivers Short Messages from/to telephone under test (ETSI ES 201 912 -protocol 1 and 2)
Fluke PM 6681 Programmable Timer
Manufacturer: Fluke
Type: calibrator
Model:PM 6681
Condition:good running
Quantity:16
Description:
With its revolutionary technology, the PM 6681 from Fluke sets the new standard for measurement of time intervals, frequency, phase and jitter. PM 6681 is much more than just a timer/counter. Its speed and resolution are comparable to the most accurate time and frequency modulation domain analyzers.
-50 ps single-shot time interval resolution (1 ps averaged)
-1.25 mV vertical resolution
-300 MHz range, options to 4.5 GHz
-8k readings/s to internal memory
-250 readings/s over GPIB
-Continuous single-period measurements at up to 40k readings/s
-Unique hold-off and arming delay facilities to measure any part of any complex signal
-250 ps single-shot time interval resolution
-100 ps averaged time interval resolution
-225 MHz range, options to 4.5 GHz
-2k readings/s to internal memory
JOT Router SOLD
Manufacturer:JOT Automation
Model: J501-22
Condition: Good running
Quantity:1
Description:
-Automatic router for high volume in-line production.
-Flexible modular design
-Dust handling system
-Upper robot for board 'pick and place'
-Lower robot with milling head for routing
-I/O conveyors
-Integrated ESD control system
-SMEMA interface
-Routing robot with three programmable axes XYZ
-Programmable cutting speed
-Programmable spindle speed (5000-50000 rpm)
Radio Communication Tester SOLD
Manufacturer: Rohde & Schwarz
Type: tester
Model: CMD 60
Condition:good running
Quantity: 5
Description:
-For R&D, production and service
-RF measurements based on ETSI Rec. CTR06
-Comprehensive audio tests
-Extremely fast measurements for high production throughput
-Ergonomic user interface for service applications
-Selfcontained, lightweight, compact tester
-The CMD60 can be remote controlled via the RS-232 or IEC/IEEE-bus interface using SCPI-compatible commands. In the remote-control mode CMD60 is designed for fast speed to yield high throughputs in production.
-High production output at low investment for test equipment
-Comprehensive test capabilities implemented in one single unit.
-Comprehensive in-depth measurements under a convenient user interface
-A lot of complex test setups with conventional equipment become redundant with the use of this special DECT tester
-Automatic regression and stress tests
-The tester supplies a great number of DECT-specific signals such as bit clock, TX/RX enable, to control the module under test
Manufacturer: NutekType: unloader
Model: NTM 110 ULL
Condition: good running
Quantity:1
Description:
-Easy operation by membrane keypad.
-Automatic magazine change-over.
-Automatic magazine alignment by upper and lower pneumatic clamping.
-Controlled by Omron PLC.
-Tailor made to the magazine of your choice.
-Threshold signal to protect PCB�s in upstream oven.
-Tower light display for machine status.
-Selectable pitch settings.
-Smema interface.
-CE cerified.
Transfer height 950mm � 25mm
Flow direction Left to right
Fixed rail Front
Machine interface SMEMA
Components clearance Top 30mm, bottom 30mm (depends on pitch)
Power supply 230VAC/50Hz/1Ph
Power consumption 350VA max.
Air supply 6 bar
Air consumption 10ltr/min max.
PCB unloading time � 6 seconds
Magazine change-over time � 30 seconds
Pitch control 1 � 4, 10mm pitch
Maximum total magazine weight 50kg each
Total number of magazines 1 magazine on the lifter platform.
2 empty magazines on the upper magazine conveyor.
3 full magazines on the lower magazine conveyor.
FIFO Buffer
Manufacturer: NutekType: buffer
Model: NTM 640SL
Condition:good running
Quantity:5
Description:
-Easy operation by membrane keypad.
-Selectable FIFO and LIFO mode.
-Controlled by Omron PLC.
-Width adjustment by hand crank.
-Flexible pitch control.
-Threshold signal to protect PCB's in upstream oven.
-Tower light display for machine status.
-Smema interface.
-CE certified.
Transfer height 950mm � 25mm
Flow direction Left to right
Fixed rail Front
Conveyor concept ESD roller
Conveyor speed 8m/min.
PCB edge support 3mm
Components clearance Top 50mm, bottom 30mm (depends on pitch)
Power supply 230VAC/50Hz/1Ph
Power consumption 350VA max.
Air supply 6 bar
Air consumption 2ltr/min max.
Machine cycle time 22 seconds max. (worst case)
Pitch control 1 � 2, 20mm pitch
Buffer capacity Max. 26 pcb�s at pitch 1
Siepel Blindage Electromagnetic
Type: blindage EM
Model: anechoic cabinet
Condition: good
Quantity: 6
Description:
Suitable for small RF / microwave devices and / or antennas
- Knife edge shielded door, for high shielding effectiveness performances (120 dB @ 1 GHz)
- Internal lining with HYFRAL broadband absorbers
- Upgradeable and flexible
- Rugged for lab life
- Movable and space saving
Branson Ultrasonic Welder
Manufacturer: Branson
Type: welder
Model: 920iw+
Condition: New
Quantity:1
Description:
Line Voltage: 200-245 AC, 14 A
Output Power: 2000 W
Maximun Clamp Force: 630 lbs. at 100 psig (2.8 kN @690kPa)
Dynamic Triggering: 10 to 200 lbs. (67 to 890 N) max.
Stroke Length: 4'' (102 mm)
Weigth: 145 lbs. (66 kg)
Included Branson SEPG-UK
Vitronics Soltec 6632
Manufacturer: E-CUBE
Type: Soldering Line
Model: E3
Condition:Brand New
Quantity:1
Description:
Alone standing Soldering Line Conveyor especially created to compile whit lead free standards and perfect integration whit Soltec wave soldering machine. This conveyor supports all kind of modification to for fill our customer needs. This conveyor is designed whit 2 lifters so for operate this is enough one operator to handle the soltec and the conveyor. For more info see please the attachments and contact us.
Maestro 5MW Separator SOLD
Description:MAESTRO 5MW is used most economically whenever large numbers of pre-scored PCBs need to be separated. The well-arranged control panel ensures easy operation. PCB panels with a maximum width of 457 mm can be separated by up to 14 circular blades simultaneously. Sensors are used to monitor the separation process. The PCBs are placed either by hand or they are fed automatically by a loading station. The machine can also be installed in an assembly line. The SMEMA interface is the standard connection for this use. The PCB Separator can be adjusted to your PCB and your individual requirements. Please contact us for more characteristics and technical data.
CS 8014 F.F.T Telephone Tester
Manufacturer: CS Strumentazione Elettronica
Type: tester
Model: CS 8014
Condition:good running
Quantity:19
Description:
-receiving, sending and side-tone sensitivities and frequency responses
-generation & sound level measurement
-Insulation up to 250V
-V(I) measurements on-hook or off-hook
-I(t) measurements for transient evaluation
-other switch sequences
-network tones generator
-DTMF generator
-FSK-V23 caller identifier generator
-DTMF caller identifier generator
-on-hook & off-hook operations
-Submits and Delivers Short Messages from/to telephone under test (ETSI ES 201 912 -protocol 1 and 2)
Fluke PM 6681 Programmable Timer
Manufacturer: Fluke
Type: calibrator
Model:PM 6681
Condition:good running
Quantity:16
Description:
With its revolutionary technology, the PM 6681 from Fluke sets the new standard for measurement of time intervals, frequency, phase and jitter. PM 6681 is much more than just a timer/counter. Its speed and resolution are comparable to the most accurate time and frequency modulation domain analyzers.
-50 ps single-shot time interval resolution (1 ps averaged)
-1.25 mV vertical resolution
-300 MHz range, options to 4.5 GHz
-8k readings/s to internal memory
-250 readings/s over GPIB
-Continuous single-period measurements at up to 40k readings/s
-Unique hold-off and arming delay facilities to measure any part of any complex signal
-250 ps single-shot time interval resolution
-100 ps averaged time interval resolution
-225 MHz range, options to 4.5 GHz
-2k readings/s to internal memory
JOT Router SOLD
Manufacturer:JOT AutomationModel: J501-22
Condition: Good running
Quantity:1
Description:
-Automatic router for high volume in-line production.
-Flexible modular design
-Dust handling system
-Upper robot for board 'pick and place'
-Lower robot with milling head for routing
-I/O conveyors
-Integrated ESD control system
-SMEMA interface
-Routing robot with three programmable axes XYZ
-Programmable cutting speed
-Programmable spindle speed (5000-50000 rpm)
Radio Communication Tester SOLD
Manufacturer: Rohde & SchwarzType: tester
Model: CMD 60
Condition:good running
Quantity: 5
Description:
-For R&D, production and service
-RF measurements based on ETSI Rec. CTR06
-Comprehensive audio tests
-Extremely fast measurements for high production throughput
-Ergonomic user interface for service applications
-Selfcontained, lightweight, compact tester
-The CMD60 can be remote controlled via the RS-232 or IEC/IEEE-bus interface using SCPI-compatible commands. In the remote-control mode CMD60 is designed for fast speed to yield high throughputs in production.
-High production output at low investment for test equipment
-Comprehensive test capabilities implemented in one single unit.
-Comprehensive in-depth measurements under a convenient user interface
-A lot of complex test setups with conventional equipment become redundant with the use of this special DECT tester
-Automatic regression and stress tests
-The tester supplies a great number of DECT-specific signals such as bit clock, TX/RX enable, to control the module under test